Created instructions

README.md

@@ -1 +1,21 @@
-# rotating_swatch_storage
+## Needed hardware
+ - 2* 51110 axial bearing (ID= 50mm, OD=70mm, H=14mm)  
+ - 6* M4 heatset inserts (Ruthex style)  
+ - 6* M4x25mm socket head screws (DIN 912 / ISO 4762)  
+
+## Printing
+Simply print all files with the orientation in the 3MF file.  
+Only the base and the bearing clamp need supports. For the top the wall generator is set to “Arachne” to get better print results for the slots.  
+
+## Preparation
+ - Remove supports  
+ - Clean outside of bearings from oil/grease  
+ - Grind running slope of “Base” lightly to get a smooth surface for the swatches to run on  
+
+## Assembly
+1. Lay “Top” on the table (bottom side up)  
+2. Mount first bearing  
+3. Mount “Base” onto “Top”  
+4. Mount second bearing  
+5. Mount “Bearing Clamp”  
+6. Screw in M4x25 tightly - don't overtighten them. I used thread locker and didn't tighten them all the way so the bearings are running easier.