22 lines
850 B
Markdown
22 lines
850 B
Markdown
## Needed hardware
|
||
- 2* 51110 axial bearing (ID= 50mm, OD=70mm, H=14mm)
|
||
- 6* M4 heatset inserts (Ruthex style)
|
||
- 6* M4x25mm socket head screws (DIN 912 / ISO 4762)
|
||
|
||
## Printing
|
||
Simply print all files with the orientation in the 3MF file.
|
||
Only the base and the bearing clamp need supports.
|
||
|
||
## Preparation
|
||
- Remove supports
|
||
- Clean outside of bearings from oil/grease
|
||
- Grind running slope of “Base” lightly to get a smooth surface for the swatches to run on
|
||
- Install heatset inserts into "Top"
|
||
|
||
## Assembly
|
||
1. Lay “Top” on the table (bottom side up)
|
||
2. Mount first bearing
|
||
3. Mount “Base” onto “Top”
|
||
4. Mount second bearing
|
||
5. Mount “Bearing Clamp”
|
||
6. Screw in M4x25 tightly - don't overtighten them. I used thread locker and didn't tighten them all the way so the bearings are running easier. |